Product Page

MT7202T

APPLICATION
Low voltage halogen replacement LEDs
Automotive lighting
Low voltage industrial lighting
LED back-up lighting
Illuminated signs
Stage lights

Product

Description

Vin(V)

Max drive capacity

PFC

Dimming

Package

PDF

MT7202T

Buck

6~50V

1.5A

-

PWM,Linear

SOT89-5

MT7202T

DESCRIPTION
The MT7202 is a continuous mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage. The device operates from an input supply between 6V~50V and provides an externally adjustable output current of up to 1.5A.
The MT7202 includes the output switch and a high-side output current sensing circuit, which uses an external resistor to set the nominal average output current. Output current can be adjusted below the set value, by applying an external control signal to the 'ADJ' pin. The ADJ pin will accept either a DC voltage or a PWM waveform. Depending upon the control frequency, this will provide either a continuous or a gated output current. The PWM filter components are contained within the chip. The PWM filter provides a soft-start feature by controlling the rise of input/output current. The soft-start time can be increased using an external capacitor from the ADJ pin to ground. Applying a voltage of 0.2V or lower to the ADJ pin turns the output off and switches the device into a low current standby state.
APPLICATION CIRCUIT

FEATURES
Simple low parts count
1.5A output current
Single pin on/off and brightness control using DC voltage or PWM
Internal PWM filter
Unique frequency Jitter technique to reduce EMI
High efficiency (up to 97%)
Wide input voltage range: 6V to 50V
Output shutdown
Up to 1MHz switching frequency
Inherent open-circuit LED protection
High accuracy output current ±3%
Available in SOT89-5 packages

Free Shipping

Order over $99

Money Return

100% Guarentee

Return Policy

30 Days Service

24/7 Support

Call +86-755-8418 2951