Product Page

MT7842BF

Non-isolated APFC BUCK LED Driver

DESCRIPTION
The MT7842BF is a high-PF, non-isolate LED Driver IC. The floating-ground, high-side BUCK topology makes full wave detection possible. High precision output current is achieved. MT7842BF works in Quasi-Resonant Mode (QRM), which improves both of efficiency and EMI performance. The system integrates the ultra-high voltage power supply circuit, the start-up resistor and power supply diode are not needed. Low external component count and cost is achieved.
Various protections such as over voltage protection (OVP), over current protection (OCP) and over temperature compensation, etc. are embedded to improve reliability. The MT7842BF integrates 550V MOSFET, which further simplifies external circuit.

FEATURES
 Single-stage active power factor correction (PFC > 0.90)
 Ultra-high voltage power supply without start-up resistor and power supply diode
 High accurate LED current (±3%)
 Good Line and Load Regulation (±2%)
 Reducing output current at low input voltage
 Quasi-Resonant mode (QRM) operation
 Various protection schemes.
 Available in SOP7 packages

APPLICATIONS
 E14/E27/PAR30/PAR38/GU10 LED lamp
 T8/T10 LED tube
 Other LED lighting applications
Ship Worldwide

On your account or prepay

Money Return

100% Guarentee

Return Policy

30 Days Service

Solution & Support

Call +86-755-8418 2951