DESCRIPTION
MT7819BD is a high precision LED constant current controller operating at critical conduction mode (CRM) with zero current switched-on and peak current switched-off. It’s mainly targeted for non-isolated buck LED power systems.
Critical conduction mode ensures that the MT7819BD turns on the internal power MOSFET when the inductor current reaches zero, reducing the power MOSFET switching loss, and achieving more than 95% efficiency. With critical conduction mode, and the input compensation, MT7819BD can achieve precise output current and excellent line regulation and load regulation.
MT7819BD embedded with internal power MOSFET, it can achieve simplified peripheral circuits and low BOM cost.
MT7819BD has wide working voltage range, which is suitable for full-range AC input. MT7819BD provides various protection features to improve the system reliability, including over current protection (OCP), short circuit protection (SCP), adjustable over voltage protection (OVP) and thermal adjustment, etc.
FEATURES
Critical Conduction Mode, insensitive to the inductance.
High efficiency (up to 95%)
Highly accurate constant LED current
Cycle-by-cycle current limiting
LED short circuit protection
Adjustable OVP through external resistor
Leading edge blanking technique
Under-voltage lockout (UVLO) protection
Thermal adjustment
Available in DIP7 package
APPLICATIONS
LED bulb, LED tube, LED signal and landscape lamp
LED stage light, LED candle light, LED corn light, etc.
General purpose constant current source

Free Shipping
Order over $99

Money Return
100% Guarentee

Return Policy
30 Days Service

24/7 Support
Call +86-755-8418 2951